Level Controller with extended I/O

View Cart


Quantity pricing

1 - 4$649.75
5 - 9$643.25
Add to Cart

The LC-6 Controller provides additional I/O using an APB-22ERD exapansion module, providing additional outputs to indicate individual pump error and warning status information and providing secondary discrete inputs as a backup to the linear (analog) level input. 

The LC Controller provides a stand alone solution for liquid level control and monitoring. To connect to a Modbus network an APB-EXPMC adaptor will be required. The optional Windows based LC_Config software requires either an APB-EXPMC Modbus adaptor or a APB-DUSB programming cable.


Download PDF

Controller & I/O Expander:

  • Power: 24 Vdc, 100 mA
  • Size 126 mm X 90 mm X 58.5 mm
  • Environment: IEC68-2
  • EMC: IEC801-3


  • 24 Vdc
  • 200 kohms (seal leak detect)
  • 0-10 Vdc/4-20 mA (level detect)


  • NO Relay (0-240 Vac, 10 Amp resistive)
  • Optional (Contact Factory)
    • NPN (sink) - 24 Vdc, 2 Amp
    • PNP (source) - 24 Vdc, 2 Amp

Level Detection:

  • 6 Levels
    • Zero Lockout, Off, Low, Mid, High, Purge
  • Specified in Inches, Feet or Meters

Duplex Controller:

  • Alternating, 1-2, 2-1, user defined sequencing
  • Time Of Day based alternate sequence
  • Pump Health: Seal Leak & Temperature
  • Run Verification: Aux Contact, Current, Phase Error

Flow Monitoring:

  • Variable sampling rate
  • Flow in Gallons, Imp. Gallons & Liters
  • Reported in Seconds, Minutes or Hours

The LC-6 is UL508a compliant when used with Class II power. Slave UL508a compliant relays should be used when switching voltages greater than 48 Vdc.

The LC Level Controller family USER MANUAL may be downloaded here.

The LC_Config application sofware provides an Windows based graphical interface for the LC product family. Using an Modbus interface the program allows:

  • Monitoring the state of all control functions
  • Configuring of all operating parameters
  • Project management tools
  • Saving and loading configurations to disk
  • Printing configuration reports
  • Operating remote units in Simulation Mode

The FREE software is available here.

NOTE: The software supports an 'offline' mode allowing the capabilities of the LC family to be evaluated with no hardware connected. To connect to the LC controller a APB-DUSB adaptor is required.

Ingram Products Inc. provides free individual PDF catalog cutsheets on all our products. In addition to the product data you can view right here on the site, the cutsheets provide dimensioned drawings, mounting hole templates and other useful information.

If you have trouble opening our PDF documents, you may wish to download the latest version of Adobe Viewer.
Help me get the latest version of Adobe Reader.

ingram products
ul enterprise
1376 Enterprise Parkway 
Ashland, OH 44805 
Copyright © 2020 Ingram Products Inc. All rights reserved.