Shop Online or Call Headquarters Toll-Free 888-875-2221
West Coast
Sales Office 951-200-3592
You may qualify for OEM discounts! Give us a call to find out:
888-875-2221
| • | Oil-less, non-lube die cast aluminum pump* with thermal protection and built-in unloader |
| • | Pressure gauge |
| • | Adjustable flowmeter |
| • | User adjustable for 0 to 10/20/30 ft. liquid levels |
| • | Cooling fan for hot environments |
| • | Comes with pre-assembled check valve, intake air filter, tees and barbed fittings |
| • | All components mounted to sturdy brushed aluminum frame |
| • | Can be fastened to panel with four #8-32 screws |
|
Every BASCR30N comes with a pneumatic connection kit that includes the following: | |
| • | (1) 25 ft. roll of urethane tubing, 1/4" OD x 1/8" ID for use with 1/8" barbed fitting. |
| • | (4) 1/4" NPT pipe thread to 1/8" ID tubing. |
| • |
(2) 1/8" NPT pipe thread to 1/8" ID tubing. |
| • | (1) 1/4" NPT female T fitting to be used at the junction of bubbler tube, bubbler air supply and pressure sensing device. |
| • | (1) 1/8" barbed T fitting intended to be used to connect the air compressor to the air tank. |
| • | Voltage: 115VAC, 60Hz |
| • | Current: 330 mA |
| • | Power: 39 Watts (Power Factor = .96) |
| • | Pump Motor: 4P, Condenser Run Type |
| • | Thermal Protection: Auto reset @ 135°C |
| • | Ambient Temperature: 0~50°C |
| • | Weight: |
| Chassis - 1.1 lbs. (0.5 kg) | |
| Pump & Bracket - 3.4 lbs. ( 1.5kg) |
Ingram Products Inc. provides free individual PDF catalog cutsheets on all our products. In addition to the product data you can view right here on the site, the cutsheets provide dimensioned drawings, mounting hole templates and other useful information.
If you have trouble opening our PDF documents, you may wish to download the latest version of Adobe Viewer.
Help me get the latest version of Adobe Reader.
BASCR30N - Bubbler Air Supply, Continuous Running
Fully functional bubbler system air supply for 0 to 30 ft level control. (2 pcs.) Pump and mounting bracket, Control Chassis w/adjustable level setting controls, fan, filters, check valves, tubing, pressure gauge and flow control/metering. 2 yr. warranty.
Quantity Price / ea.
| Qty | Price |
| 1 - 4 | $ 405.89 |
| 5 - 9 | $ 382.98 |
| 10 - 19 | $ 358.31 |
| 20 - 49 | $ 336.29 |
| 50 - 99 | $ 312.78 |
Introducing Ingram's new bubbler system air supply. The
Bubbler Air Supply Continuous Running unit has been redesigned with the
industrial control panel designer in mind. Its smaller footprint and separate
housings for the pump and control chassis will take up less space in your unit.
The BASCR-30N measures and controls the bubbler pressure and airflow for any 0
to 10, 20 or 30 ft bubbler type level controlling system. This system employs a
continuously running pump that directly provides the air for the bubble
tube. It features an oilless pump and auxillary fan to remove excess heat
that could otherwise damage components. Bubbler systems are simple,
reliable, inexpensive, and well suited for corrosive or slurry fluid
environments such as would be found in lift stations. Bubbler tubes have no
electrical components, so there is no spark potential, making them perfect
for conditions where intrinsically safe equipment is required. Simply
adjust in the field to measure the level you need. following the instructions
printed on the unit. PLEASE NOTE: This
unit provides everything you need for the air supply side of a bubbler level
detection system but does not include the pressure transducer, associated fluid
level monitoring equipment, alarm apparatus or bubbler
tube.
